PBR Configuration Example
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
653
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
PBR CONFIGURATION EXAMPLE
Figure 13: PBR Configuration Scenario using OmniAccess 5740 USG
Consider a scenario, a corporate XYZ with two departments - Finance and
Engineering.
XYZ would like to send finance department's traffic on to the next-hop
203.121.10.1 and send engineering department's traffic on 150.23.221.50. Its
LAN is connected on one of the L2GE ports (configured as VLAN 10).
In order to achieve this, you need to configure a routing policy and the following
match conditions and forwarding action:
To Next Page
Loading...
Need help?
General
