Routing Information Protocol
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
531
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
CHAPTER 24 ROUTING INFORMATION PROTOCOL
This chapter covers the Routing Information Protocol (RIP) configuration used in
the OmniAccess 5740 USG. It provides a broad overview on RIP V1 and V2
configuration including the timer, authentication, default route, and monitoring
commands.
For a detailed information on the RIP commands, refer to the RIP chapter in the
OmniAccess 5740 Unified Services Gateway CLI Command Reference
Guide.
This chapter includes the following sections:
• “RIP Overview”
• “RIP Configuration”
The “RIP Overview” section serves only as an additional information on RIP. You
can skip this section, and directly go to the configuration section of this chapter
detailed in “RIP Configuration”.
CHAPTER CONVENTIONS
Acronym Description
CM Configuration Mode - ALU (config)#
ICM Interface Configuration Mode - ALU (config-interface name)#
RCM Router Configuration Mode - ALU (config-router rip)#
RIP Routing Information Protocol
SUM Super User Mode - ALU#
To Next Page
Loading...
Need help?
General
