Port Monitoring
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
243
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
CHAPTER 10 PORT MONITORING
This chapter covers the commands used to configure Port Monitoring on the
OmniAccess 5740 USG.
For instructions on using the port monitoring commands and descriptions on each
of their parameters with the corresponding default values for each, refer to the
OmniAccess 5740 Unified Services Gateway CLI Command Reference
Guide.
This chapter includes the following sections:
• “Port Monitoring Overview”
• “Port Monitoring Configuration”
• “Port Monitoring Configuration on OmniAccess 5740 USG”
The “Port Monitoring Overview” section serves as an additional information on the
port monitoring. You can skip this section, and directly forward to the configuration
section of this chapter.
CHAPTER CONVENTIONS
Acronym Description
CM Configuration Mode - ALU (config)#
ICM Interface Configuration Mode - ALU (config-interface name)#
SUM Super User Mode - ALU#