Alcatel-Lucent OmniAccess 5740 - 7 Per VLAN Spanning Tree; Chapter Conventions

Per VLAN Spanning Tree +
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
199
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
CHAPTER 7 PER VLAN SPANNING TREE +
This chapter documents the commands for bridging configuration. These
commands are used to configure the Per VLAN Spanning Tree Protocol Plus
(PVST+). For a more detailed information on the parameter descriptions and their
corresponding default values, refer to the OmniAccess 5740 Unified Services
Gateway CLI Command Reference Guide.
This chapter includes the configuration steps, CLI syntax with its description and
configuration examples. The commands are described in sequential order of
configuration.
This chapter is divided into the following sections:
• “Per VLAN Spanning Tree (PVST+) Overview”
• “PVST+ Configuration”
• “PVST+ Configuration Examples”
CHAPTER CONVENTIONS
Acronym Description
CM Configuration Mode - ALU (config)#
ICM Interface Configuration Mode - ALU (config-interface name)#
SUM Super User Mode - ALU#