Alcatel-Lucent OmniAccess 5740 - Clear Commands in PIM

Multicast Routing
Left running head:
Chapter name (automatic)
626
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
CLEAR COMMANDS IN PIM
TO CLEAR SG STATE INFORMATION
EXAMPLE
ALU# clear ip pim state-info
T
O CLEAR NEIGHBOR INFORMATION
EXAMPLE
ALU# clear ip pim neighbor GigabitEthernet 3/0 1.1.1.1
T
O CLEAR IP PIM RP MAPPING
EXAMPLE
ALU# clear ip pim rp-mapping
T
O CLEAR IP PIM BSR
E
XAMPLE
ALU# clear ip pim bsr
Command (in SUM/CM) Description
clear ip pim state-info [<group-
address>] [<source-address>]
This command clears the PIM SG
State information.
Command (in SUM/CM) Description
clear ip pim neighbor {*|
<interface-name> {[neighbor-
address]|*}}
This command clears the neighbor
information on an interface.
Command (in SUM/CM) Description
clear ip pim rp-mapping [<rp-
address>]
This command clears the mulitcast
group addresses mapped to the RP.
Command (in SUM/CM) Description
clear ip pim bsr [<bsr-address>] This command clears the BSR
address.