PPP Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
353
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
PPP DEBUG COMMANDS
TO ENABLE DEBUGGING ON PPP
E
XAMPLE
ALU(config)# debug ppp all
ALU(config)# debug ppp echo
T
O DISABLE DEBUGGING ON PPP
E
XAMPLE
ALU(config)# no debug ppp echo
Command (in SUM/CM) Description
debug ppp all [detail-level
<1-9>]
This command shows all the debug
messages pertaining to the PPP
functionality.
debug ppp echo [output
{all|log|vty}]
This command shows the LCP echo
requests and reply messages.
Command (in SUM/CM) Description
no debug ppp {all|echo} The “no” command disables the debug
functionality. By default, debug is
disabled.
To Next Page
Loading...
