Alcatel-Lucent OmniAccess 5740 Cli Configuration Guide

IP Security - Virtual Private Network
Left running head:
Chapter name (automatic)
904
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
IPSEC VPN SERVER CONFIGURATION
Refer to the following sections for configuring IPsec:
• “IPsec VPN Server Configuration Steps”
• “IPsec VPN Server Configuration Flow”
• “IPsec VPN Server Configuration Commands”
IPSEC VPN SERVER CONFIGURATION STEPS
The following are the steps to configure IPsec VPN Server on OmniAccess 5740
USG:
Step 1: Configure a crypto client object. See “To Configure Client Object”
Step 2: Configure parameters under a crypto client object.
• Configure primary and secondary DNS (Domain Name Server) IP
address in a crypto client object. See “To Configure Primary and
Secondary DNS IP Address”
• Configure primary and secondary WINS (Windows Internet Name
Service) IP address. See “To Configure Primary and Secondary IP
Address”
• Attach a list to the crypto client object. See “To Attach a List to a Crypto
Client Object”
Step 3: Configure Optional parameters under a crypto client object.
• Configure keep alive interval for a client connection. See “To Configure
Keep Alive Interval”
• Enable/disable client firewall. See “To Configure Client Firewall”
• Enable/disable the client to save password. See “To Enable/Disable Save
Password”

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English