Network Address Translation
Left running head:
Chapter name (automatic)
708
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
NAT CLEAR COMMANDS
TO CLEAR NAT DETAILS
EXAMPLE
The following example clears the counters of NAT ‘n1’.
ALU# clear ip nat statistics n1
ALU#
The following example clears the statistics of the NAT for interface
‘GigabitEthernet3/0’.
ALU# clear ip nat statistics GigabitEthernet3/0 in
ALU#
Command (in SUM/CM) Description
clear ip nat statistics <nat
policy-name>
This command clears the statistics of a
specific NAT policy.
clear ip nat statistics
<interface-name> {in|out|both}
This command is used to clear the
statistics of a NAT Policy on a particular
interface.
To Next Page
Loading...
