Alcatel-Lucent OmniAccess 5740 - Protocol-Independent Configuration

Protocol Independent Features
Left running head:
Chapter name (automatic)
502
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
PROTOCOL-INDEPENDENT CONFIGURATION
To configure optional protocol-independent features, perform any of the tasks
described in the following sections:
• “Configure Static Routes”
• “Configure IP Unnumbered Interface”
• “Configure Access-List”
• “Configure Prefix-list”
• “Configure AS-path Access-list”
• “Configure Route Maps”
• “Redistribute Routing Information”
• “Filtering Routing Information”
• “Configure Administrative Distance”
• “Configure Maximum Paths”
• “Protocol Independent Features Show Commands”
• “Protocol Independent Features Clear Command”