Alcatel-Lucent OmniAccess 5740 - PPP Show Commands

Point-to-Point Protocol
Left running head:
Chapter name (automatic)
346
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
PPP SHOW COMMANDS
The following commands are used to view the PPP configuration details and
statistics.
T
O VIEW PPP CONFIGURATION
EXAMPLE
ALU# show ppp all configuration Serial 0/0:0
LCP Max Echoes : 5
LCP Echo Interval : 60 (sec)
LCP Restart Interval : 30 (sec)
IPCP pool IP address : 50.51.52.54
IPCP local IP address from peer: Reject
IPCP peer IP address : Reject
PPP Restart timer : 3 (sec)
PPP Max Terminate : 2
PPP Max Configure : 10
PPP Max Failure : 5
Authentication protocol : pap
Authentication username : user1
Authentication password : secret1
Authentication client-username : user2
Authentication client-password : secret2
Command (in SUM/CM/ICM) Description
show ppp all configuration
Serial <slot/port:channel>
Displays all the PPP configuration
information for a specified interface.