VRRP Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
153
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
MONITOR AND DEBUG VRRP
TO VIEW DETAILS OF ALL VRRP GROUPS
EXAMPLE
ALU(config-if GigabitEthernet3/0)# show vrrp all
Interface GigabitEthernet3/0 - Group 1
State is Master
Virtual IP address is 10.1.1.1
Virtual MAC address is 0000.5e00.0101
Advertisement interval is 1.000 sec
Preemption enabled
Priority is 255
Master Router is 10.1.1.1 (local), priority is 255
Master Advertisement interval is 1.000 secs
Master Down interval is 3.000 secs
Interface GigabitEthernet3/0 - Group 2
State is Master
Virtual IP address is 20.1.1.1
Virtual MAC address is 0000.5e00.0102
Advertisement interval is 1.000 sec
Preemption enabled
Priority is 100
Master Router is 10.1.1.1 (local), priority is 100
Master Advertisement interval is 1.000 secs
Master Down interval is 3.000 secs
ALU(config-if GigabitEthernet3/0)#
ALU(config-if GigabitEthernet3/0)# show vrrp all brief
Interface Grp Prio Preempt State Master addr Group addr
GigabitEthernet3/0 1 255 Y Master 10.1.1.1 10.1.1.1
GigabitEthernet3/0 2 100 Y Master 10.1.1.1 20.1.1.1 ALU(config-
if GigabitEthernet3/0)#
Command (in SUM/CM/ICM) Description
show vrrp all [brief] This command displays a brief or
detailed status of all VRRP groups
configured on the OmniAccess 5740
USG.