SNMP (Simple Network Management Protocol)
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
135
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
SNMP SHOW COMMANDS
TO VIEW SNMP DETAILS
EXAMPLE
ALU(config)# show snmp details
SNMP status : Enabled
Traps : Enabled
System information
------------------
System Contact : support@alcatel-lucent.com name alu1
System Location : [Not configured]
Community-Access Community-String
---------------- ----------------
read-only private
read-write [Not configured]
Trap-Host Trap-Port Version Trap-Community
--------- --------- ------- --------------
1.1.1.1 10 v1 test
1.1.1.11 11 v1 test1
Command (in SUM/CM) Description
show snmp details This command is used to view the
SNMP configuration details.
To Next Page
Loading...
