Alcatel-Lucent OmniAccess 5740 - Filters

System Configuration and Monitoring
Left running head:
Chapter name (automatic)
134
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
T
O CONFIGURE SNMP ACCESS CONTROL
Access Control indicates whether the object is accessible by either a community
string or a user.
E
XAMPLE
ALU(config)# snmp-server access testgroup security-model v3
auth read read-view write write-view notify notify-view
ALU(config)# no snmp-server access testgroup security-model v3
auth
Command (in CM) Description
snmp-server access <group-
name> security-model
{v1|v2c|v3} {auth|noauth|priv}
{context <context-name>
{exact|prefix}|read <read-
view-name>|write <write-view-
name>|notify <notify-view-
name>}
This command is used to configure
access control for a group. Group name
is the group associated with access
control policy.
Auth provides authentication based on
the MD5 or SHA algorithms. If you use
noauth, no authentication is used.
Priv provides authentication based on
the MD5 or SHA algorithms, and
encryption based on the CBC-DES
(DES-56) standard.
no snmp-server access <group-
name> security-model
{v1|v2c|v3} {auth|noauth|priv}
This command removes the access
control configuration.