Alcatel-Lucent OmniAccess 5740 - Clear Commands in TF

Transparent Firewall
Left running head:
Chapter name (automatic)
966
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
T
O VIEW TF POLICY STATISTICS
EXAMPLE
ALU(config)# show transparent-forward statistics
!
! Transparent-forward Statistics
!
interface GigabitEthernet3/1 :
IP 0, ARP 0, IPX 0, AppleTalk 0, Others 0,Dropped 0
interface GigabitEthernet3/0 : tf
IP 0, ARP 0, IPX 0, AppleTalk 0, Others 0,Dropped 0
ALU(config)#
CLEAR COMMANDS IN TF
TO CLEAR TF POLICY STATISTICS
EXAMPLE
ALU(config)# clear transparent-forward statistics
Command (in SUM/CM) Description
show transparent-forward
statistics [<tf-policy name>]
This command is used to display the
statistics of all the TF policies configured
in the system.
If a policy-name is specified, then the
statistics for the specified TF policy are
displayed.
This displays the number of IP, 'other
protocol' packets (excluding the above)
forwarded by TF, and number of packets
dropped.
Command (in SUM/CM) Description
clear transparent-forward
statistics [<tf-policy name>]
This command clears the statistics of
all the TF policies configured in the
system.
If a TF policy is specified, then the
statistics for the specified TF policy
are cleared.