802.1X Port-Based Authentication
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
221
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
CHAPTER 9 802.1X PORT-BASED AUTHENTICATION
This chapter describes how to configure IEEE 802.1X port-based authentication
on the OmniAccess 5740 USG. This chapter includes the configuration steps, CLI
syntax with its description and configuration examples. The commands are
described in sequential order of configuration.
For a more detailed information on the parameter descriptions and their
corresponding default values, refer to the OmniAccess 5740 Unified Services
Gateway CLI Command Reference Guide.
This chapter is divided into the following sections:
• “802.1X Overview”
• “802.1X Configuration”
• “802.1X Configuration Example”
CHAPTER CONVENTIONS
Acronym Description
CM Configuration Mode - ALU (config)#
ICM Interface Configuration Mode - ALU (config-interface name)#
SUM Super User Mode - ALU#
To Next Page
Loading...
Need help?
General
