Alcatel-Lucent OmniAccess 5740 - Show Commands in PIM

PIM Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
623
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
SHOW COMMANDS IN PIM
TO VIEW PIM INTERFACE INFORMATION
EXAMPLE
ALU# show ip pim interface
Address Interface Ver/ Nbr Query DR DR
Mode Count Intvl Prior
3.3.3.4 GigabitEthernet3/0 v2/S 0 30 1 3.3.3.4
4.4.4.4 GigabitEthernet3/1 v2/S 0 30 1 4.4.4.4
8.8.8.7 Serial0/0:0 v2/S 1 30 1 8.8.8.8
6.6.6.6 Serial0/1:0 v2/S 1 30 1 6.6.6.7
ALU#
ALU# show ip pim interface GigabitEthernet 3/0
Address Interface Ver/ Nbr Query DR DR
Mode Count Intvl Prior
3.3.3.4 GigabitEthernet3/0 v2/S 0 30 1 3.3.3.4
ALU#
TO VIEW PIM NEIGHBOR INFORMATION
EXAMPLE
ALU#show ip pim neighbor
PIM Neighbor Table
Neighbor Interface Uptime/Expires Ver DR Address Prio/Mode
8.8.8.8 Serial0/0:0 00:09:37/00:01:39 v2 1/ DR
6.6.6.7 Serial0/1:0 00:09:45/00:01:33 v2 1/ DR
ALU#
Command (in SUM/CM) Description
show ip pim interface
[<interface-name>]
This command shows the interfaces
on which PIM is enabled, and details
like interface DR priority and current
DR on the interface is displayed.
Command (in SUM/CM) Description
show ip pim neighbor
[<interface-name>]
This command displays PIM
neighbors on all interfaces.
To see neighbors on a specific
interface, use the interface name.