PBR Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
651
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
SHOW COMMANDS IN PBR
TO VIEW IP POLICY DETAILS
EXAMPLE
ALU(config)# show ip-policy
!
! IP-Policy configuration
!
ip-policy pbr1
10 match any m1 m2 interface GigabitEthernet3/0 next-hop
1.2.2.1
exit
!
interface GigabitEthernet3/1
ip-policy pbr1
exit
T
O VIEW IP POLICY STATISTICS
EXAMPLE
ALU(config)# show ip-policy statistics
PBR - Policy Based Routed, Drop - Dropped
0 packets forwarded by best effort IP forwarding
ip-policy pbr1 : PBR - 0 Drop - 0
0 hits on : 1 match any m1 next-hop 1.1.1.1
Command (in SUM/CM) Description
show ip-policy [<name>] This command is used to view all the IP
policies configured in the system.
This command is also used to view the
details of a specific IP policy.
This command also displays interfaces
on which these policies are applied.
Command (in SUM/CM) Description
show ip-policy statistics
[<ip-policy name>]
This command is used to display the
statistics of all the IP policies configured
in the system.
If a policy-name is specified, then the
statistics for the specified IP policy are
displayed.
This displays the number of packets that
hit the rules in the IP policy, and number
of packets dropped.