Link Fragmentation and Interleaving (LFI)
Left running head:
Chapter name (automatic)
450
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
LFI - MLPPP SHOW COMMANDS
TO VIEW LFI CONFIGURATION
EXAMPLE
ALU(config)# show interface mlppp 100
mlppp100 is up, line protocol is up
Internet address is 20.20.20.20/24
MTU 1494 bytes, BW 512 Kbit, DLY 0 usec,
reliability 255/255, txload 10/255, rxload 10/255
Encapsulation mlppp, loopback not set
IPCP: Open
Last input never, output never, output hang never
Last clearing of "show interface" counters never
2 packets input (2 Control packets, 0 Data packets), 28 bytes
2 packets output (2 Control packets, 0 Data packets), 28 bytes
0 packets dropped, 0 giants received
Fragmentation: Fragment Delay 10 ms
5 fragmented, 0 couldn't fragment
10 fragments created, 0x9 sent sequence
Reassembly: Slippage MRU 16
0 fragments in reassembly list
0 lost fragments, 0 reordered
11 discarded fragments, 0 reassembled
0 timeouts, 0 couldn't reassemble
0 fragments received, 0xb received sequence
Command (in SUM/CM/ICM) Description
show interfaces mlppp <1-256> Displays the LFI configuration on the
MLPPP bundle interface specified.
To Next Page
Loading...
