Alcatel-Lucent OmniAccess 5740 - DHCP Client Show Commands

DHCP Client Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
1067
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
DHCP CLIENT SHOW COMMANDS
TO VIEW DHCP CLIENT CONFIGURATION
E
XAMPLE
ALU(config)# show ip dhcp client
Hostname : myhost
-------------------------------------------
Client_name : test
Vendor_class_id : test1
-------------------------------------------
Client_name : client1
Vendor_class_id : broadband-forum.org
Request_type : address
Client_id : client123
Requested_address : 10.10.10.1
Parameter_request_list : bootfile-name
Interfaces : GigabitEthernet3/0
-------------------------------------------
Command (in SUM/CM) Description
show ip dhcp client [<client-
name>]
This command shows the entire DHCP
client related configuration. This includes
DHCP global configurations, all DHCP
client objects and their association with
interfaces.
Specify the client object name to display
the DHCP configuration for a specific
DHCP client object.