Using the Command Line Interface
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
33
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
COMMAND HISTORY
EXAMPLE
ALU(config)# show history
1: enable
2: disable
3: en
4: disable
5: enable
6: configure t
7: interface GigabitEthernet 3/0
8: exit
9: interface GigabitEthernet 3/0
10: ip address 10.91.0.24/24
11: top
12: configure t
13: interface GigabitEthernet 3/05B
14: interface GigabitEthernet 3/0.1
15: interface GigabitEthernet 3/0:3.1
16: service completion spacebar-complete
17: no service completion spacebar-complete
18: no service completion
19: show history
Keystrokes Function Details
History This gives the list of all commands entered in
the present session.
To Next Page
Loading...
