Alcatel-Lucent OmniAccess 5740 - To View Process Information; Example

System Configuration and Monitoring
Left running head:
Chapter name (automatic)
113
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
TO VIEW PROCESS INFORMATION
This command displays all the processes currently running in the system, such as
SSH, RIP, BGP, Statlog, etc.
EXAMPLE
ALU(config)# show processes
PID Uid VmSize Stat Command
1 root 532 S init
2 root SW [keventd]
3 root SWN [ksoftirqd_CPU0]
4 root SW [kswapd]
5 root SW [bdflush]
6 root SW [kupdated]
7 root SW [khubd]
49 root 504 S /usr/sbin/inetd /etc/inetd.conf
383 root 508 S /bin/ash /bin/tm-sh
384 root 504 S /bin/sh /etc/monitor
409 root 1236 S tm -i vnet0 pm -A
423 root 388 S cat /dev/ss_mem
424 root 1736 S pm -A
426 root 552 S /bin/sh /apps/usr/sbin/core_mover.sh
437 root 2152 S vrrp
459 root 1672 S tftpd -lD -s /tftp
460 root 1448 S statsagent
465 root 2076 S statlogd -c
470 root 2368 S ribmgr ribmgr initial
471 root 2428 S srm srm initial
472 root 29324 S snort -A NONE -N -i eth0 -c/apps/etc/snort/snort.con
487 root 1952 S aclmgr aclmgr initial
488 root 2120 S rip rip initial
489 root 2108 S pvstd
490 root 1652 S pppoed
491 root 2128 S pluto --nofork --nat_traversal
492 root 2548 S pim pim pim
493 root 2048 S ospfd ospfd initial
494 root 2272 S nhrpd
495 root 2180 S mcribmgr mcribmgr initial
496 root 1604 S ike_wr
497 root 2508 S igmp igmp igmp
498 root 1400 S gre
499 root 1640 S ea
500 root 1472 S dot1x
501 root 2084 S dnsproxy initial
502 root 2016 S dhcprelay initial
503 root 2072 S dhcpd
504 root 1980 S dhclient
507 root 3944 S controld
510 root 46312 S switchd 11
511 root 2264 S bgp bgp initial
2691 root 344 S sleep 30
2700 root 672 S rshd
Command (in SUM/CM) Description
show processes Displays the CPU information.