Alcatel-Lucent OmniAccess 5740 - DDNS Client Configuration Commands

Dynamic DNS (DDNS) Client
Left running head:
Chapter name (automatic)
1100
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
DDNS CLIENT CONFIGURATION COMMANDS
TO CONFIGURE A DDNS METHOD
EXAMPLE
ALU(config)# ip ddns method myDdnsObj
ALU(config-ddns-myDdnsObj)#
ALU(config)# no ip ddns method myDdnsObj
DDNS method myDdnsObj deleted.
T
O CONFIGURE PROTOCOL TYPE FOR A METHOD
EXAMPLE
ALU(config–ddns-myDdnsObj)# http
ALU(config-ddns-HTTP)#
Command (in CM) Description
ip ddns method <method-name> This command is used to configure a
DDNS method. This enters the DDNS
method configuration mode.
A method contains a set of attributes
such as protocol, server, URL and
interval timer. All these used to update
the DDNS server.
no ip ddns method <method-
name>
This command is used to delete a DDNS
method. When a method is deleted, all
the attributes configured for a method
will also be deleted.
Command (in DDNS Method CM) Description
http This command is used to configure the
HTTP as the update method.
This enters the DDNS HTTP
configuration mode.