DDNS Client Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
1101
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
TO CONFIGURE DDNS SERVER PARAMETERS FOR A METHOD
EXAMPLE
ALU(config-ddns-HTTP)## server dyndns username myMembername
password myMemberPass
ALU(config-ddns-HTTP)# no server dyndns
Command (in DDNS HTTP CM) Description
server {dyndns|easydns|
justlinux|zoneedit} username
<username> password <password>
This command is used to configure the
server settings like the server name, user
name and the password for
authentication.
If no URL is configured, DDNS client will
use this configuration to create a URL
and update the DDNS server.
Note: When URL and server
configuration both exists,
URL configuration is
considered to update the
DDNS server.
no server {dyndns|easydns
|justlinux|zoneedit}
This command is used to delete the
server attributes of a DDNS method.
To Next Page
Loading...
Need help?
General
