Alcatel-Lucent OmniAccess 5740 - Rescue Mode Options

System Monitoring and Troubleshooting
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
117
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
RESCUE MODE OPTIONS
If you are facing any problem in the bootup of OmniAccess 5740 USG, you can
use any of the rescue options given below.
• Power off and power on the OmniAccess 5740 USG.
• The bootup message comes up.
• Press Ctrl-C when you see the message “Press Ctrl-C for Boot Options”.
• Select option 3 to load the rescue options as shown below.
U-boot 1.1.3 (Rev 1.9) (Jan 31 2009 - 18:49:58) OmniAccess
5740
Press Ctrl-C for Boot Options : 0
BOOT OPTIONS
0. Reload Device
1. Boot without Startup-Config
2. Boot Normally
3. Boot to Rescue mode
4. Boot with factory default
Enter an Option number : 3
Loading rescue Images...
RESCUE OPTIONS
0. Reload Device
1. Rescue Shell
2. Directory listing
3. Repartition and Format storage device
4. List installed packages
5. Set default package
6. Install package from Front Panel USB
7. Remove Package
8. Backup Config area to Front Panel USB
9. Restore Config area from Front Panel USB
Select an option :