Alcatel-Lucent OmniAccess 5740 - Page 144

System Configuration and Monitoring
Left running head:
Chapter name (automatic)
118
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
An explanation on each of the above rescue options is given below.
BOOT OPTIONS
• 0. Reload Device
Reboot the device.
• 1. Boot without Startup-Config
If this option is selected, the system will boot up without applying any startup-
configuration. After this, if the system is reloaded, it will revert to the default
behaviour of loading the startup configuration. That is, the startup
configuration is disabled only for the current bootup when this option is
selected.
• 2. Boot Normally
This boots the system in the normally.
• 3. Boot Rescue Mode
This boots the rescue mode and displays the RESCUE menu.
• 4. Boot with factory default
If this option is selected, the system will boot up with the factory default
configuration. When this is done, the startup configuration is erased.
If you select option 3 from the BOOT menu, you will be taken to the RESCUE
menu.
Note: Loading the Rescue menu takes approximately 20-25 seconds.
RESCUE OPTIONS
• 0. Reload Device
Reboot the device.
• 1. Rescue Shell
Unix type debug shell.
• 2. Directory listing
Lists files in the user: partition or in the fpkey: usb.