Ethernet Interfaces on SE
Left running head:
Chapter name (automatic)
176
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
ETHERNET INTERFACE CLEAR COMMANDS
TO CLEAR COUNTERS ON GIGE INTERFACE
EXAMPLE
ALU(config)# clear counters GigabitEthernet 3/0
Clear counters on this interface [confirm]y
ALU(config)#
T
O CLEAR COUNTERS ON GIGE INTERFACE
EXAMPLE
ALU(config-if GigabitEthernet3/0)# clear
Clear counters on this interface [confirm]y
ALU(config)#
Command (in CM/ICM) Description
clear counters
GigabitEthernet <slot/port>
(:subinterface_number)
This command clears the counters on a
specific GigE interface.
Command (in ICM) Description
clear This command is used in the Interface
Configuration Mode. This command
clears the counters on a specific GigE
interface.
To Next Page
Loading...
Need help?
General
