Alcatel-Lucent OmniAccess 5740 - Page 378

Point-to-Point Protocol
Left running head:
Chapter name (automatic)
352
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
PPP A
UTHENTICATION SHOW COMMANDS
The following commands are used to view the PPP authentication configuration:
T
O VIEW THE PPP AUTHENTICATION DETAILS
EXAMPLE
ALU# show ppp authentication configuration Serial 0/0:0
Authentication protocol: pap
Authentication username: user1
Authentication password: secret1
T
O VIEW THE PPP AUTHENTICATION STATISTICS
EXAMPLE
ALU# show ppp authentication statistics Serial 0/0:0
IN OUT
PAP Authentication Requests: 2 2
PAP Authentication Acks: 2 2
PAP Authentication Naks: 0 0
PAP Invalid Packets: 0 0
IN OUT
CHAP Challenges: 0 0
CHAP Responses: 0 0
CHAP Successes: 0 0
CHAP Failures: 0 0
CHAP Invalid Packets: 0 0
IN OUT
EAP Requests: 0 4
EAP Responses: 4 0
EAP Successes: 0 2
EAP Failures: 0 0
EAP Invalid Packets: 0 0
Command (in SUM/CM/ICM) Description
show ppp authentication
configuration Serial <slot/
port:channel>
Displays the PPP authentication
configuration information for a specified
interface.
Command (in SUM/CM/ICM) Description
show ppp authentication
statistics Serial <slot/
port:channel>
Displays detailed statistics for PPP
authentication for a specified interface.