Alcatel-Lucent OmniAccess 5740 - Page 1124

Dynamic DNS (DDNS) Client
Left running head:
Chapter name (automatic)
1098
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
Step 8: Configure IP address for the interface
ALU(config-if <interface-name>)# ip address {<ip-
address subnet-mask>|<ip-address/prefix-length>}
Example:
ALU(config-if Serial0/0)# ip address 20.20.20.20/24
Step 9: Configure DDNS host name and apply DDNS method on an interface.
See “To Configure Host Name and Apply DDNS Method on an Interface”
Step 10: View the DDNS client by using the show commands. See “To View
DDNS Client Configuration”