Alcatel-Lucent OmniAccess 5740 Cli Configuration Guide

DDNS Client Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
1103
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
The following provides the URL for some commonly used servers. These formats
are provided by the DDNS service provider.
• DDNS - http://USERNAME:PASSWORD@members.dyndns.org/nic/
update?system=dyndns&hostname=<h>&myip=<a>
(It is preferable to configure the maximum interval for the update method as
“28days 0hours 0minutes 0seconds” when using this URL type.)
• EASYDNS - http://USERNAME:PASSWORD@members.easydns.com/dyn/ez-
ipupdate.php?action=edit&myip=<a>&host_id=<h>
• JUSTLINUX - http://USERNAME:PASSWORD@www.justlinux.com/bin/
controlpanel/dyndns/
jlc.pl?direst=1&username=USERNAME&password=PASSWORD&host=<h>&ip=
<a>
• ZONEEDIT - http://USERNAME:PASSWORD@www.dynamic.zoneedit.com/auth/
dynamic.html?host=<h>&dnsto=<a>
Please note that ‘USERNAME’ and ‘PASSWORD’ must be placed with
appropriate values in the above format.
T
O CONFIGURE TIME INTERVAL FOR A METHOD
EXAMPLE
ALU(config–ddns-myDdnsObj)# interval maximum 0 1 1 1
ALU(config–ddns-myDdnsObj)# no interval maximum
Command (in DDNS Method CM) Description
interval {maximum|minimum} <0-
365> <0-23> <0-59> <0-59>
DDNS client sends periodic updates to
the DDNS server. This command is used
to configure the maximum or minimum
interval (in days, hours, minutes and
seconds) at which the updates is to be
sent to the DDNS server.
no interval {maximum|minimum} This command is used to delete the
interval timer settings configured for
DDNS method and resets it to the
default.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English