System Configuration and Monitoring
Left running head:
Chapter name (automatic)
95
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
T
O SAVE THE CONFIGURATION
To save the running configuration to the start-up configuration, use the following
commands. Both commands are identical in functionality.
E
XAMPLE
ALU(config)# save running-config
Saving to startup-config ...
ALU(config)# write memory
Saving to startup-config ...
T
O SAVE THE CONFIGURATION UNDER A DIFFERENT FILE NAME
To save the running configuration under a different file name use the following
command:
E
XAMPLE
ALU(config)# save running-config my-config
Saving to my-config ...
Command (in CM) Description
save running-config This command saves the running
configuration to the start-up
configuration.
The command "write memory" can also
be used to save the running
configuration to the start-up
configuration.
Command (in CM) Description
save running-config <file-
name>
This command saves the running
configuration under the specified file
name in the config directory.
To Next Page
Loading...
