Alcatel-Lucent OmniAccess 5740 - Page 157

SNMP (Simple Network Management Protocol)
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
131
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
TO CONFIGURE SNMP DETAILS
EXAMPLE
ALU(config)# snmp system contact support@alcatel-lucent.com
ALU(config)# no snmp system contact
T
O ENALBE SNMP TRAP
EXAMPLE
ALU(config)# snmp trap enable
ALU(config)# no snmp trap enable
Command (in CM) Description
snmp system {contact <contact-
details>|location <location>
|name <name>}
This command is used to configure
the SNMP system contact details,
system’s physical location information
and SNMP system name.
no snmp system {contact
|location|name}
This command removes the specified
SNMP system details.
Command (in CM) Description
snmp trap enable This command enables the agent to
send the SNMP traps to the
configured host.
no snmp trap enable This command disables sending the
SNMP traps to the configured host.