VRRP Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
147
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
EXAMPLES OF INCORRECT CONFIGURATION
Consider the following examples for incorrect configuration with corresponding
error messages:
E
XAMPLE 1:
ALU(config-if GigabitEthernet3/0)#ip address 10.1.1.1/24
ALU(config-if GigabitEthernet3/0)#ip address 10.2.1.1/24
secondary
ALU(config-if GigabitEthernet3/0)#interface GigabitEthernet
3/1
ALU(config-if GigabitEthernet3/1)#ip address 20.1.1.1/24
ALU(config-if GigabitEthernet3/1)#ip address 20.2.1.1/24
secondary
ALU(config-if GigabitEthernet3/1)#vrrp 1 ip 10.1.1.1
Error - 10.1.1.1 already assigned as interface IP to
GigabitEthernet3/0
ALU(config-if GigabitEthernet3/1)#
ALU(config-if GigabitEthernet3/1)#interface GigabitEthernet
3/0
ALU(config-if GigabitEthernet3/0)#vrrp 2 ip 20.1.1.1
Error - 20.1.1.1 already assigned as interface IP to
GigabitEthernet3/1
ALU(config-if GigabitEthernet3/0)#
E
XAMPLE 2:
ALU(config-if GigabitEthernet3/0)#vrrp 1 ip 10.1.1.1
ALU(config-if GigabitEthernet3/0)#vrrp 2 ip 10.2.1.1
ALU(config-if GigabitEthernet3/0)#interface GigabitEthernet
3/1
ALU(config-if GigabitEthernet3/1)#ip address 10.1.1.1/24
Error - Address already configured in a VRRP group on an
another interface
ALU(config-if GigabitEthernet3/1)#ip address 10.2.1.1/24
secondary
Error - Address already configured in a VRRP group on an
another interface
ALU(config-if GigabitEthernet3/1)#
To Next Page
Loading...
