Alcatel-Lucent OmniAccess 5740 - Page 197

Ethernet Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
171
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
TO CONFIGURE MTU (MAXIMUM TRANSMISSION UNIT) ON THE INTERFACE
EXAMPLE
ALU(config-if GigabitEthernet3/0)# mtu 100
ALU(config-if GigabitEthernet3/0)# no mtu
T
O CONFIGURE SPEED
EXAMPLE
ALU(config-if GigabitEthernet3/0)# speed 100
ALU(config-if GigabitEthernet3/0)# no speed
Command (in ICM) Description
mtu <64-1500> This command is used to configure the
MTU of the interface, i.e., the maximum
packet size that the interface can accept.
no mtu <64-1500> The “no” command sets the MTU to its
default.
The default MTU is 1500 bytes.
Command (in ICM) Description
speed {10|100|1000|auto} This command configures the interface
speed.
no speed The “no” command sets the interface
speed to its default.
The default speed is “auto”.