Alcatel-Lucent OmniAccess 5740 - Page 219

L2 Switching Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
193
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
TO VIEW VLANS CONFIGURED ON OMNIACCESS 5740 USG
E
XAMPLE
ALU# show vlan id 10
VLAN_ID Status Interface name Mode
-------- ---------- ------------------- -----
10 Inactive switchport0/0 Access
ALU(config)# show vlan Brief
VLAN_ID Status Interface name Mode
--------- ---------- ------------------- -----
1 Inactive switchport0/2 No-Mode
switchport0/3 No-Mode
switchport0/4 No-Mode
switchport0/5 No-Mode
10 Inactive switchport0/0 Access
switchport0/7 Access
switchport0/6 Trunk
20 Inactive switchport0/1 Access
Command (in SUM/CM) Description
show vlan {Brief|id <1-4094>}
• The “show vlan Brief” command
displays all the VLANs that are
configured on the OmniAccess 5740
USG.
• The “show vlan id” displays the
configuration of a specific VLAN ID.