Alcatel-Lucent OmniAccess 5740 - Page 266

802.1X Port-Based Authentication
Left running head:
Chapter name (automatic)
240
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
shutdown
top
!
interface switchport0/5
shutdown
top
!
interface switchport0/6
shutdown
top
!
interface switchport0/7
shutdown
top
!
end
C
HECK THE CONFIGURATION WITH THE SHOW COMMAND
ALU# show dot1x all
Global 802.1X parameters
System-auth-control: Enable
802.1X port summary
Port Name Status Operation Mode Mode Authorized
switchport0/0 Enabled Single-Host Auto n/a
switchport0/1 Enabled Multi-Auth Auto yes
switchport0/2 Disabled Single-Host Force-Authorized n/a
switchport0/3 Disabled Single-Host Force-Authorized n/a
switchport0/4 Disabled Single-Host Force-Authorized n/a
switchport0/5 Disabled Single-Host Force-Authorized n/a
switchport0/6 Disabled Single-Host Force-Authorized yes
switchport0/7 Disabled Single-Host Force-Authorized n/a
802.1X port details
----------------------------------------
802.1X is enabled on switchport0/0
reauth-enabled : Disable
reauth-period : 3600
quiet-period : 60
tx-period : 30
supp-timeout : 30
server-timeout : 30
max-req : 2
operation_mode : Single-Host
port-control : Auto
Supplicant : 00.00.00.00.00.00
Status : Unauthorized
Current Identifier : 14
Authenticator state machine
State : Initialize