E1 Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
257
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Step 7: Administratively bring up the serial interface. See “To Bring up and
Shutdown the Interface”
Step 8: Configure the IP address for the interface. See “To Configure IP Address
for the Interface”
Step 9: Configure encapsulation. See “To Set Encapsulation on the Interface”
(Optional)
Step 10: Configure MTU (Maximum Transmission Unit) on the Interface. See “To
Configure MTU on the Interface” (Optional)
Step 11: See “To View the E1 Controller Configuration” to view the E1
configuration details.
Step 12: View the interface configuration details. See “To View Interface
Configuration” command.
To Next Page
Loading...
