E1 Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
267
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
TO CONFIGURE MTU ON THE INTERFACE
EXAMPLE
ALU(config-if Serial0/0:0)# mtu 1200
ALU(config-if Serial0/0:0)# no mtu
Command (in ICM) Description
mtu <64-1500> This command is used to configure the
MTU value on the serial interface, i.e., the
maximum size of the transmitted layer 2
payload.
no mtu The “no” command sets the MTU to its
default.
The default MTU is 1500 bytes.
To Next Page
Loading...
Need help?
General
