T1E1 Line Card
Left running head:
Chapter name (automatic)
274
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
Step 7: Administratively bring up the interface. See “To Bring Up/Shutdown the
Interface”
Step 8: Configure the IP address for the interface. See “To Configure IP Address
for the Interface”
Step 9: Configure encapsulation on the interface. See “To Set Encapsulation on
the Interface” (Optional)
Step 10: Configure MTU (Maximum Transmission Unit) on the Interface. See “To
Configure MTU on the Interface” (Optional)
Step 11: See “To View the Controller Configuration” to view T1 configuration.
Step 12: View the interface configuration details. See “To View Interface
Configuration” command.
To Next Page
Loading...
