Universal Serial Port (USP) Line Card
Left running head:
Chapter name (automatic)
294
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
T
O CONFIGURE IP ADDRESS FOR THE INTERFACE
EXAMPLE
ALU(config-if Serial0/0)# ip address 20.20.20.20/24
ALU(config-if Serial0/0)# no ip address 20.20.20.20/24
Command (in ICM) Description
ip address {<ip-address
subnet-mask>|<ip-address/
prefix-length>}
This command is entered in the interface
configuration mode to configure an IP
address for the interface.
no ip address {<ip-address
subnet-mask>|<ip-address/
prefix-length>}
This command is used to remove the IP
address for the interface.
To Next Page
Loading...
Need help?
General
