MLPPP Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
377
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
TO SET MLPPP ENCAPSULATION ON AN INTERFACE
EXAMPLE
ALU(config)#interface Serial1/0:0
ALU(config-if Serial1/0:0)# encapsulation mlppp 100
ALU(config-if serial1/0:0)# no encapsulation mlppp
Note: If the encapsulation of a serial interface is changed to MLPPP from HDLC/PPP/FR,
the QoS policy applied on the serial interface will be removed after giving a warning
message.
Command (in ICM) Description
encapsulation mlppp <1-256> This command sets MLPPP encapsulation
on an interface.
The interface becomes a member link of
the bundle interface identified by the
bundle ID.
no encapsulation mlppp This command sets the encapsulation to its
default.
The default encapsulation on a serial
interface is HDLC.
To Next Page
Loading...
