Bridging Configuration on PPP/MLPPP/FR/MLFR/HDLC/GigE Interface
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
427
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Step 4: Set PPP encapsulation on the interface
ALU(config-if <interface-name>)# encapsulation ppp
Example:
ALU(config-if Serial0/0)# encapsulation ppp
Step 5: Enable/disable BCP on the interface. See “To Enable/Disable BCP on the
Interface”
Note: 1. To prevent undesirable loops and have path redundancy in the network, you can
enable Spanning Tree Protocol (STP) on OmniAccess 5740 USG when bridging is
enabled.
Refer to “Per VLAN Spanning Tree +” chapter for more details on global STP
configuration and interface specific STP configuration.
2. MAC filters in ingress and egress direction can be attached on the bridged enabled
interface. For more details on the MAC based match-list and MAC filter configuration
commands, refer to the “Common Classifiers” and “Filter and Firewall” chapters.
Step 6: See “BCP Show Commands” to view BCP configuration on the interface.
To Next Page
Loading...
