CC Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
495
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
TO DELETE A RULE
EXAMPLE
Consider the following example:
ALU(config)# match-list m1
ALU(config-match-list-m1)# 10 tcp host 1.1.1.1 any from 6050
Now, to delete the rule having rule number 10, use the ‘no rule’ command:
ALU (config-match-list-m1)# no rule 10
T
O DELETE THE INCLUDED MATCH-LIST
EXAMPLE
Consider the following example:
ALU(config)# match-list m2
ALU(config-match-list-m2)# 1 tcp any any service ssh
ALU(config-match-list-m2)# 2 udp prefix 22.1.1.0/8 any
ALU(config-match-list-m2)# 3 include m1
Now, to delete the included match-list, use the ‘no include’ command:
ALU(config-match-list-m2)# no include m1
Command (in Match-list CM)
Description
no rule <1-1024> This command is entered in the Match-
list Configuration mode to delete a
specific rule from that Match-list, with
reference to its line/rule number.
Command (in Match-list CM) Description
no include <match-list name> Enter this command in the specific
Match-list Configuration Mode.
This command is used to delete the
match-list, that is included in another
match-list.
To Next Page
Loading...
