Using the Command Line Interface
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
29
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
COMMAND SYNTAX HELP
To view a list of keywords or arguments, enter a question mark (?) in the place of
a keyword or argument. Include a space before the ‘?’. This type of help is called
the Command Syntax Help as the keywords / arguments associated with the
command already entered are displayed.
E
XAMPLE
ALU(config)# show ip
** PRIVILEGE COMMANDS **
access-lists List IP access lists
as-path-access-list List AS path access lists
community-list List community-list
dhcp Dynamic Host Configuration Protocol commands
filter filter details
mroute Multicast
multicast Multicast
nat NAT keyword
prefix-list List IP prefix Lists
rpf Show RPF information for multicast source
** BASIC COMMANDS **
bgp BGP information
fib IP FIB Table Statistics
igmp IGMP information
interface Interface (slot/port:channel.subchannel - chan
& subchan optional)
ospf OSPF information
pim PIM information
protocols IP routing protocol process parameters and
statistics
rip IP RIP show commands
route IP routing table
traffic IP Traffic Statistics
vrf VPN Routing/Forwarding instance information
To Next Page
Loading...
Need help?
General
