BGP Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
565
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
TO VIEW BGP NEIGHBORS
EXAMPLE
ALU# show ip bgp neighbors
BGP neighbor is 1.1.1.2, remote AS 100, external link
BGP version 4, remote router id 3.3.3.3
BGP state = Established, up for 00:12:08
Last read 00:00:07, Last sent 00:00:07
Hold time is 180, keepalive interval is 60 seconds
Neighbor capabilities:
Route refresh: advertised and received
Address family IPv4 Unicast: advertised and received
Received 342 messages, 0 notifications, 0 in queue
Sent 333 messages, 7 notifications, 0 in queue
Minimum time between advertisement runs is 30 seconds
For Address Family IPv4 Unicast
Route refresh request: received 0, sent 0
Number of Unicast prefixes received 5
Prefixes advertised 1, accepted 5, filtered 0, dampened 1
Number of updates pending 0, withdrawals pending 0
Route map for incoming advertisements is metric1
Connections established 9; dropped 8
Last reset 00:12:44, due to Interface Flap
Connection state is ESTAB
Local host: 1.1.1.1, Local port: 32835
Foreign host: 1.1.1.2, Foreign port: 179
iss: 0 snduna: 0 sndnxt: 0 sndwnd: 2
irs: 0 rcvnxt: 0 rcvwnd: 0
SRTT: 0 ms, RTTO: 51964 ms, RTV: 34464 ms, minRTT: 0 ms
BGP neighbor is 111.111.111.112, remote AS 300, external link
BGP version 4, remote router id 118.0.0.1
BGP state = Established, up for 00:17:01
Last read 00:01:00, Last sent 00:00:01
Hold time is 180, keepalive interval is 60 seconds
Neighbor capabilities:
Route refresh: advertised and received
Address family IPv4 Unicast: advertised and received
Received 322 messages, 1 notifications, 0 in queue
Sent 331 messages, 8 notifications, 0 in queue
Minimum time between advertisement runs is 30 seconds
For Address Family IPv4 Unicast
Command (in SUM/CM) Description
show ip bgp neighbors {<ip-
address> [advertised-routes
|dampened-routes|flap-
statistics|paths [<regular-
expression>]|received-
routes|routes]|vrf <vrf-name>}
This command displays the information
about the TCP and BGP neighbor
connections.
To Next Page
Loading...
Need help?
General
