Alcatel-Lucent OmniAccess 5740 - Page 602

Open Shortest Path First
Left running head:
Chapter name (automatic)
576
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
Step 5: Configure OSPF network. See “To Configure OSPF Network”
Step 6: Configure the following OSPF optional parameters. See “OSPF
Optional Parameters”
• Configure Passive Interfaces. See “To Configure Passive Interfaces”
• Configure OSPF Area Parameters. See “To Configure OSPF Area
Parameters”
• Configure OSPF Interface Parameters. See “To Configure OSPF
Interface Parameters”
• LSA Group Pacing. See “LSA Group Pacing”
• Configure OSPF for Non-broadcast Networks. See “To Configure OSPF
for Non-broadcast Networks”
• Configure Route Summarization. See “To Configure Route
Summarization”
• Generate a Default Route. See “To Generate a Default Route”
• Control Default Metrics. See “To Control Default Metrics”
• Configure OSPF Administrative Distances. See “To Configure OSPF
Administrative Distances”
• Configure Route Calculation Timers. See “To Configure Route Calculation
Timers”
• Log Adjacency Changes. See “To Log Adjacency Changes”