Alcatel-Lucent OmniAccess 5740 Cli Configuration Guide

Open Shortest Path First
Left running head:
Chapter name (automatic)
580
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
T
O ENABLE AREA AUTHENTICATION
EXAMPLE
ALU(config-router ospf 1)# area 1 authentication message-digest
T
O CONFIGURE DEFAULT COST
EXAMPLE
ALU(config-router ospf 1)# area 1 default-cost 100
Command (in RCM) Description
area {<0-4294967295>|<ip-
address>} authentication
[message-digest]
Enables authentication for an OSPF
area.
Use ‘message-digest’ keyword to
enable MD5 authentication.
The default authentication is Plain Text
authentication.
no area {<0-4294967295>|<ip-
address>} authentication
[message-digest]
Disables authentication for an OSPF
area.
Command (in RCM) Description
area {<0-4294967295>|<ip-
address>} default-cost <0-
16777215>
Assigns a specific cost to the default
summary route used for the stub area/
NSSA.
no area {<0-4294967295>|<ip-
address>} default-cost <0-
16777215>
Removes the specific cost assigned to
the default summary route used for the
stub area/NSSA.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English