OSPF Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
605
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Example 10:
ALU# show ip ospf retransmission-list
OSPF Router with ID (1.1.1.2) (Process ID 1)
Neighbor 1.1.1.1, interface GigabitEthernet 3/0 address 1.1.1.2
Link state retransmission due in 4 sec, Queue length 0
Type LS ID ADV RTR Seq NO Age Checksum
Neighbor 6.6.6.6, interface GigabitEthernet 3/1 address 2.2.2.2
Link state retransmission due in 0 sec, Queue length 1
Type LS ID ADV RTR Seq NO Age Checksum
3 1.1.1.0 1.1.1.2 0x80000001 2 0x69AA
ALU#
Example 11:
ALU# show ip ospf route
OSPF Router with ID (1.1.1.2) (Process ID 1)
Dest/Mask Type Adv-Rtr Cost Area/tag NextHop
2.0.0.0/8 Summ 1.1.1.2 20 0 0.0.0.0
1.1.1.0/24 Ext-2 0.0.0.0 20 0 1.1.1.2
2.0.0.0/8 Summ 1.1.1.2 20 0 0.0.0.0
2.2.2.0/24 Ext-2 0.0.0.0 20 0 2.2.2.2
45.5.5.0/24 Ext-2 0.0.0.0 20 0 0.0.0.0
ALU#
Example 12:
ALU# show ip ospf summary-address
OSPF Process 1, Summary-address
192.175.0.0/255.255.0.0 Metric -1, Type 2, Tag 4 2.0.0.0/
255.0.0.0 Metric 20, Type 2, Tag 0 router-2(config)#
To Next Page
Loading...
Need help?
General
