VRF-CE Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
675
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
BGP SHOW COMMANDS IN VRF
E
XAMPLE
ALU(config)# show ip bgp vrf v1
BGP local router ID is 200.1.1.1
Status codes: s suppressed, d damped, h history, * valid, > best, i -
internal
Origin codes: i - IGP, e - EGP, ? - incomplete
Command (in CM) Description
show ip bgp [vrf <vrf-
name>]
This command displays the BGP routing
table. If the VRF name is specified, it displays
the BGP routing table for the specified VRF.
show ip bgp community [vrf
<vrf-name>]
This command displays the routes that
belong to specified BGP communities.
If the VRF name is specified, it displays the
routes that belong to specified BGP
community for the specified VRF.
show ip bgp community-list
[vrf <vrf-name>]
This command displays the routes that are
permitted by the BGP community list.
If the VRF name is specified, it displays the
routes that are permitted by the BGP
community list for the specified VRF.
show ip bgp flap-statistics
[vrf <vrf-name>]
This command displays the flap statistics of
BGP routes.
If the VRF name is specified, it displays the
flap statistics of BGP routes for the specified
VRF.
show ip bgp neighbors [vrf
<vrf-name>]
This command is used to see the neighbors
connection state.
If the VRF name is specified, it displays the
neighbors connection state in specified VRF.
show ip bgp peer-group [vrf
<vrf-name>]
This command displays the information about
the given peer group.
If the VRF name is specified, it displays the
information about the given peer group for
the specified VRF.
clear ip bgp [vrf <vrf-
name>] {*|<1-65535>|<ip-
address>|dampening|external
|flap-statistics
|ipv4|peer-
group}
Clears the BGP connections. If the AS is
specified, connection to the specified AS is
cleared. If the VRF name is specified, it
clears the connection for the specified VRF.
To Next Page
Loading...
Need help?
General
