Filter and Firewall
Left running head:
Chapter name (automatic)
728
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
T
O VIEW THE FILTER STATISTICS ON AN INTERFACE
EXAMPLE
The following command displays the filter statistics in the "IN" direction:
ALU(config)# show ip filter statistics GigabitEthernet 3/0
in
ip filter f1
20 match any m1 permit Hits 0
default deny
interface GigabitEthernet3/0 In, Stats On
Command (in SUM/ICM) Description
show ip filter statistics
[<interface-name>
{in|out|both}|<filter-name>]
This command displays the statistics of a
filter on a particular interface.
To view the statistics, turn it on by using
the command "ip filter statistics both" (for
both IN and OUT directions).
To Next Page
Loading...
Need help?
General
