ALGs Supported in OmniAccess 5740 USG
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
789
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
TO VIEW TFTP ALG STATISTICS
EXAMPLE
ALU(config)# show firewall alg tftp statistics
Total SNAT Write commands : 0
Total DNAT Write commands : 0
Total Filter Write Commands : 0
Total SNAT Read Commands : 0
Total DNAT Read Commands : 0
Total Filter Read commands : 0
Total Pinholes created : 0
Total Pinholes matched : 0
Total Pinholes timed out : 0
Total Pinholes failed : 0
T
O VIEW RPC-PORTMAP ALG STATISTICS
EXAMPLE
ALU(config)# show firewall alg rpc statistics
Total SNAT RPC CALL Packets : 0
Total DNAT RPC REPLY Packets : 0
Total DNAT DUMP REPLY Packets : 0
Total Pinholes created : 0
Total Pinholes matched : 0
Total Pinholes failed : 0
Total Pinholes removed : 0
Command (in SUM/CM) Description
show firewall alg tftp statistics This command is used to view
the TFTP ALG statistics.
Command (in SUM/CM) Description
show firewall alg rpc statistics This command is used to view
the RPC-Portmap ALG statistics.
To Next Page
Loading...
